OMC Elbow Ring Outboards 0916017 150-175

( Brand: Omc ), ( Manufacturer Part Number: 916017 ), ( Part Type: Ring Hp Elbow )

Review OMC Elbow O ring Johnson Hp Outboards fits 1997–1998

The **OMC 916017 / 0916017 Elbow O-Ring** is a precision-engineered sealing component specifically designed for Johnson outboard motors in the 150 175 horsepower range, ensuring optimal performance, reliability, and longevity for critical fluid systems. Crafted from high-quality **Nitrile (Buna-N) rubber**, this o-ring is engineered to withstand the demanding conditions of marine environments, including exposure to gasoline, oil, hydraulic fluids, and varying temperatures typically ranging from -40 F to 257 F (-40 C to 125 C). Its durable construction resists swelling, hardening, and degradation over time, making it an ideal choice for sealing the elbow joints in the fuel, oil, or hydraulic lines where leaks could compromise engine efficiency or lead to costly repairs.

This o-ring features a **tight, consistent cross-section** and a **smooth, uniform outer diameter**, ensuring a perfect fit within the Johnson outboard s elbow housing to prevent fluid leakage while maintaining proper pressure within the system. Its **reinforced design** minimizes wear from vibration, flexing, and repeated pressure cycles, which are common in high-performance marine applications. Whether installed in the fuel transfer lines, oil return paths, or hydraulic systems, this o-ring plays a crucial role in maintaining the integrity of the outboard s internal components, reducing the risk of contamination and ensuring seamless operation.

For maximum compatibility and ease of installation, the **OMC 916017 / 0916017** is designed to fit snugly within the designated groove of Johnson s 150 175 HP outboards, including models like the **EATON Johnson 150, 160, 175 HP** series. Its **universal application** within these power ranges makes it a dependable replacement part for both original equipment and aftermarket upgrades, helping to restore peak performance to engines that may have experienced wear or damage over time. By maintaining a tight seal, this o-ring helps prevent fuel or oil leaks that could lead to reduced fuel efficiency, overheating, or even engine failure making it an essential component for any marine enthusiast or professional seeking long-term reliability in their Johnson outboard.

### **Pros and Cons of buying a OMC 916017/0916017 Elbow O-Ring for Johnson 150 175 HP Outboards**

#### **Pros**

1. **Direct Compatibility** The part number (916017/0916017) is specifically designed for Johnson outboards in the 150 175 HP range, ensuring a proper fit without modification. This reduces the risk of leaks or improper sealing compared to generic or mismatched replacements.

2. **High-Quality Material** OMC (Outboard Marine Corporation) parts are manufactured to meet strict industry standards, often using durable rubber compounds resistant to oil, fuel, and environmental degradation. This extends the part s lifespan and improves reliability.

3. **Prevents Leaks and Damage** A failing elbow o-ring can lead to coolant or oil leaks, which may cause overheating, engine damage, or corrosion. Replacing it promptly with an OEM part ensures the system remains sealed and functional.

4. **Warranty Coverage** If purchased from an authorized dealer or through OMC s official channels, the part may come with a warranty, providing peace of mind against defects or premature failure.

5. **Easier Installation** Since it s a direct replacement, installation is straightforward, requiring minimal tools and expertise. This saves time and labor costs compared to custom-fitted or aftermarket alternatives.

6. **Maintenance Consistency** Using OEM parts aligns with the manufacturer s intended specifications, which can be crucial for maintaining performance and resale value, especially if the boat is kept in good condition.

---

#### **Cons**

1. **Higher Cost** OMC parts are typically more expensive than aftermarket or generic alternatives. For budget-conscious buyers, this may be a significant drawback, especially if the part is only needed for routine maintenance.

2. **Limited Availability** Depending on the region, OMC parts may not be readily available at local marine supply stores. Purchasing online (e.g., from OMC s website, Amazon, or specialty marine retailers) may involve shipping delays or additional fees.

3. **Potential Overkill for Minor Issues** If the o-ring failure is isolated and not part of a broader system problem (e.g., a worn impeller or clogged passages), replacing just the o-ring may not address the root cause, leading to repeated failures if the underlying issue isn t resolved.

4. **Installation Complexity for DIYers** While the part itself is simple, removing the old o-ring may require disassembling parts of the lower unit, which can be tricky for inexperienced hands. Improper handling could damage seals or threads, voiding warranties or requiring additional repairs.

5. **Counterfeit Risk** Purchasing from untrusted sellers (e.g., third-party online marketplaces) increases the risk of receiving counterfeit or low-quality parts that fail prematurely. Always verify the seller s reputation and part authenticity.

6. **Environmental and Disposal Concerns** O-rings contain rubber compounds that may not be easily recyclable. If disposing of the old part, buyers should follow local regulations for hazardous or automotive waste.

---

### **Conclusion**

The **OMC 916017/0916017 elbow o-ring** is a reliable, high-quality choice for Johnson 150 175 HP outboards, offering direct compatibility, durability, and peace of mind. However, its higher cost and potential availability issues may make it less ideal for those on a tight budget or in remote areas. For most boat owners, the long-term benefits of using an OEM part such as preventing leaks, maintaining performance, and avoiding costly engine damage outweigh the drawbacks.

### **Recommendation**

- **Buy from an authorized source** (e.g., OMC s official website, a dealership, or a reputable marine parts retailer) to ensure authenticity and warranty coverage.

- **Compare prices** with aftermarket alternatives (e.g., from brands like **Flexseal, Gasket King, or Marine Parts Warehouse**) if cost is a major concern, but verify compatibility and reviews to avoid poor-quality substitutes.

- **Consider professional installation** if you lack experience with outboard lower-unit repairs, as improper handling can lead to further damage.

- **Check for bundled deals** some retailers offer discounts when purchasing multiple OMC parts or accessories for your specific outboard model.

**Final Verdict:** For most Johnson 150 175 HP outboard owners, the **OMC 916017/0916017 elbow o-ring** is the best choice for reliability and longevity, provided it is purchased from a trusted source. If budget constraints are a priority, thoroughly research aftermarket options while ensuring they meet OMC s specifications.

Details:

Part number 916017 0916017. New OEM part. MPN: 916017 0916017. Condition: New.

Horse Power: 150/175. Year: 1997 -1998. OMC Elbow O-Ring.

part #: 916017 prices

• $9.99-$15.10

specifications ouboaen:

• for makes: Johnson, Omc
• for years: 1997-1998
• brand: Omc
• mpn: 916017
• part type: Ring Hp Elbow

general ouboaen:

• Boat Parts > Outboard Engines Components > Other
• condition: New

shipping ouboaen:

• carrier: USPS, UPS
• class: Standard, Expedited
• cost: $0.00
• service: USPS First Class, USPS Priority Mail, UPS Ground
• transit: 4-8 Days
• type: Calculated

returns ouboaen:

• paid by: Seller
• policy: Returns Accepted
• time: 30 Days

payments ouboaen:

• credit card: Discover
• wallet: Google-pay
• other

seller ouboaen:

• rating: 99.8%
• city: Green Bay, Wisconsin
• # reviews: 29975

offer ouboaen:

• quantity: 7
• best offers: True
• availability: In Stock
• sold: 0
• started: May 10, 2026
• options: Ship-to-home

Omc 916017 Is Similar To:

• 0123278 0123610 Omc Johnson Evinrude Outboard Motor Binnacle Control Box Handle Kit (28.2% similar) New handle kit fits single and dual mount binnacle controls...(May 28th, 2018)
• 0127084 Brp Evinrude Johnson Omc Stringer Thrust Washer (37% similar) Thrust washer...(July 2nd, 2018)
• 0173298 Omc Johnson Evinrude Emergency Ignition Shut Off Switch Nos (32.1% similar) Omc,eventide,johnson new shut off stop switch kit. These kits are new old stock, they have not been used or opened, this product is no longer in production. Part number: 0173298RETAIL: 22...(March 2nd, 2019)
• 0174033 Omc New Johnson Evinrude (33.3% similar) New oem switch and connector am. If you choose the slow cheap option will get exactly what pay for...(April 30th, 2017)
• 0174811 174811 Johnson Evinrude Omc Stainless Prop Lh Outboard Propeller (38.2% similar) Condition: used but in good condition and guaranteed to function properly. Part: johnson eventide stainless LHS counter rotation viper prop x 19P v6 outboard propeller fits various motor parts. Pb please see included pictures...(October 30th, 2018)
• 0176360 176360 Omc Horn Assy Johnson Evinrude (31.2% similar) Part: 2004 -2005 prices...(March 17th, 2019)
• 0176461 Omc Nos Johnson Evinrude Remote Oil Fill Kit (31% similar) New Omc item in box...(November 29th, 2018)
• 0176711 176711 0768411 768411 0176711 176711 0768411 Johnson-evinrude-omc-brp 745419070984 (28.6% similar) Never installed or used...(September 11th, 2017)
• 0177284 Evinrude Brp Omc Johnson Outboard Gallon Remote Oil Tank Sensor (40% similar) Omc, eventide, johnson e-etc outboard motor 3 gallon remote oil tank w bracket. Mounting bracket not included. Good for all Omc, eventide, johnson model's including e-etc will work with Fichte oil sensor has continuity...(January 7th, 2019)
• 0203362 Omc Evinrude Johnson 203362 (36.4% similar) Eventide johnson cam follower roller and shaft fits diameter 5HP 1957 only fits 10HP 1961 18HP only 1961 ROLLER is...(January 12th, 2018)
• 0282474 Omc Johnson 150 235 (35.2% similar) Used cowl taken from a freshwater 1985 eventide 150HP motor. This cowl will fit many other years and model's, although the decals are specific to 1985 . The cover shows wear and scratches that would be typical of a part is 30 years old, but in good condition...(May 13th, 2017)