HONDA 91014-752-621 Bearing 60/28

( Manufacturer Part Number: 91014-752-621 ), ( Part Type: Bearing )

Review HONDA Bearing 60/28 Oem New

The **Honda 91014-752-621 bearing (60/28)** is a precision-engineered, high-performance radial ball bearing designed specifically for Honda s internal combustion engine applications, particularly within the crankshaft and camshaft systems of select models. This bearing falls under the **60-series** classification, indicating its standard deep-groove ball design optimized for smooth, low-friction rotation under high-speed and high-load conditions. The **28** designation refers to its bore diameter, measured at **28 millimeters**, ensuring a precise fit within Honda s engine housings, such as those found in the **F20B, F22B, F23A, or F24A engine families**, including popular models like the **Civic, Accord, CR-V, and HR-V**. Crafted from high-grade **chromium steel**, this bearing features a **hardened outer ring** (typically 58 62 HRC) and a **cage system** (often made from pressed steel or synthetic polymer) that evenly spaces the balls to minimize wear and prevent metal-to-metal contact, thereby extending the bearing s lifespan and maintaining optimal engine performance.

The **91014-752-621** is engineered to withstand the rigorous demands of modern automotive engines, including thermal expansion, axial and radial loads, and the constant vibrations inherent in high-revving applications. Its **sealed or shielded design** (depending on the variant) helps protect against contamination from engine oil, dust, and debris, reducing the risk of premature failure. The bearing s **premium lubrication** often pre-loaded with Honda-approved grease or oil ensures consistent lubrication during installation and initial engine operation, while its **tight tolerances** guarantee minimal play, contributing to quieter operation and enhanced durability. Whether used in **crankshaft bearings, camshaft bearings, or auxiliary components**, this bearing is a critical component for maintaining engine efficiency, reducing friction, and preventing catastrophic wear over extended mileage.

For automotive technicians and DIY enthusiasts, the **Honda 91014-752-621** represents a reliable, OEM-quality replacement part that upholds the brand s reputation for reliability and performance. Its compatibility with a range of Honda engines makes it a versatile choice for maintenance and rebuild projects, ensuring that engines operate with the same level of precision and longevity as they did when new. When properly installed and paired with the correct engine oil specification, this bearing helps mitigate common issues like **bearing wear, oil whipping, or excessive noise**, ultimately preserving the integrity of the engine s critical rotating assemblies.

### **Pros and Cons of buying a Honda 91014-752-621 Bearing (60/28)**

1. **OEM Quality** This bearing is a genuine Honda part, meaning it meets the manufacturer s strict standards for durability, precision, and compatibility with Honda engines. OEM components are designed to match the original specifications, reducing the risk of premature failure or performance issues.

2. **Reliability and Longevity** Honda is known for producing high-quality automotive parts, and this bearing is no exception. It is built to withstand the stress of engine operation, reducing the likelihood of bearing wear or failure over time. Properly installed, it can last the full service life of the engine.

3. **Compatibility** This bearing is specifically designed for Honda engines, particularly those requiring a **60/28 bearing** (common in models like the **Honda GX series, BF series, or certain generators**). Using an OEM part ensures a perfect fit, avoiding clearance issues or improper seating that could lead to vibration or damage.

4. **Warranty Coverage** Purchasing from an authorized Honda dealer or a reputable aftermarket supplier may include a warranty, offering protection against defects. This can be valuable if the bearing fails prematurely due to manufacturing issues.

5. **Performance Consistency** Unlike aftermarket or generic bearings that may vary in quality, an OEM bearing ensures consistent performance. This is critical for engines where bearing failure could lead to catastrophic damage (e.g., rod bearing failure in a small-block engine).

6. **Ease of Installation** Since it is a standard OEM part, it is designed to be installed with the same tools and procedures as the original bearing. This reduces the risk of installation errors that could compromise its function.

7. **Resale Value** If you plan to sell or trade in the engine or equipment later, using OEM parts can make the unit more appealing to buyers who prefer genuine components.

---

1. **Higher Cost** OEM bearings are significantly more expensive than aftermarket or generic alternatives. For example, while an aftermarket 60/28 bearing might cost **$10 $20**, the Honda 91014-752-621 could range from **$30 $60 **, depending on the source. This can be a major drawback for budget-conscious buyers or those working on a tight budget.

2. **Limited Availability** Genuine Honda parts may not be readily available at all auto parts stores. You may need to order from an **authorized dealer, Honda s official website, or a specialized online retailer**, which could involve longer wait times or shipping costs.

3. **Overkill for Some Applications** If you are replacing a bearing in a **non-Honda engine** or a **low-stress application** (e.g., a small generator that rarely runs), an OEM bearing may be unnecessarily expensive. In such cases, a high-quality aftermarket bearing (e.g., **Fel-Pro, King, or NAC**) could suffice at a fraction of the cost.

4. **Potential for Counterfeit Parts** When purchasing online, there is a risk of receiving a **counterfeit OEM part** that is not genuine. This can lead to premature failure or poor performance. Always buy from **trusted sellers** (e.g., Honda-authorized dealers, reputable online marketplaces with seller ratings) to avoid this issue.

5. **No Advantage in Aftermarket Markets** In competitive aftermarket environments (e.g., racing, high-performance tuning), some engineers prefer **aftermarket bearings** (e.g., **Clevite, INA, or Torrington**) that offer specialized coatings (e.g., **lead-indium, molybdenum disulfide**) for extreme conditions. OEM bearings may not provide these advanced features.

6. **Environmental and Ethical Concerns** Some consumers prefer **aftermarket or recycled parts** to reduce waste from new manufacturing. While this is a valid consideration, it is not a practical concern for most buyers, as OEM bearings are still recyclable.

---

### **Conclusion**

The **Honda 91014-752-621 bearing (60/28)** is a **high-quality, reliable, and compatible** choice for Honda engines where original equipment is desired. Its advantages in **durability, fitment, and warranty support** make it ideal for **original equipment replacement, long-term use, or applications where failure cannot be tolerated**. However, its **higher cost and limited availability** may not justify the purchase for **budget-conscious buyers, non-Honda applications, or low-stress setups**.

If you are working on a **Honda engine, generator, or equipment where reliability is critical**, the OEM bearing is the **best choice**. If you are on a **tight budget, replacing a non-Honda bearing, or in a high-performance application**, a **high-quality aftermarket alternative** (e.g., **Fel-Pro, King, or NAC**) may be a more cost-effective solution without sacrificing performance.

---

### **Final Recommendation**

- You are replacing a bearing in a **Honda engine or generator**.

- You prioritize **long-term reliability and OEM compatibility**.

- You can afford the **higher cost** and want warranty protection.

- You are replacing a **failed OEM bearing** and want to maintain original specifications.

- You are working on a **non-Honda engine** or a **low-stress application**.

- You need to **save money** and can find a **reputable aftermarket bearing** (e.g., **Fel-Pro 60/28, King 60/28, or NAC 60/28**).

- You are in a **high-performance or racing environment** where specialized coatings (e.g., **lead-indium**) are beneficial.

- Always **verify the part number** before purchasing to ensure it matches your engine s requirements.

- Purchase from **authorized dealers or trusted online retailers** to avoid counterfeit parts.

- If unsure, **consult a Honda technician or engine specialist** to confirm compatibility.

Details:

With OEM outboard parts, you get the right fit and performance every time.

part #: 91014752621 prices

• $19.49-$40.82

specifications ouboaen:

• for makes: Honda
• mpn: 91014-752-621
• part type: Bearing

general ouboaen:

• Boat Parts > Outboard Engines Components > Other
• condition: New

returns ouboaen:

• paid by: Seller
• policy: Returns Accepted
• time: 30 Days

offer ouboaen:

• sold: 0
• started: May 17, 2026
• availability: In Stock
• options: Ship-to-home
• quantity: 2

shipping ouboaen:

• transit: 6-13 Days
• service: Standard, Expedited
• type: Fixed
• cost: $9.95
• class: Standard, Expedited

payments ouboaen:

• wallet: Paypal
• other
• credit card: Discover

seller ouboaen:

• rating: 99.8%
• city: Albany, Georgia
• # reviews: 63957

Honda 91014-752-621 Is Similar To:

• 06192-zw1-000 Honda New Oem Marine Water Pump Repair Kit Part (25.5% similar) ...(March 1st, 2018)
• 06192-zw1-305 Honda New Oem Marine Water Pump Repair Kit Part (25.5% similar) ...(March 1st, 2018)
• 06192-zy3-000 Honda Oem Brand New Water Pump Impeller Service Kit For (23.6% similar) ...(March 30th, 2018)
• 06193-zv5-020 Honda New Oem Marine Water Pump Rebuild Kit Part (25.2% similar) ...(March 1st, 2018)
• 06380-zv5-000ah Honda Oem Black Bezel (28.2% similar) Feel free to call and order. T269D box a Jeremy. This is guaranteed...(February 13th, 2018)
• 06631 Zy3-305za Honda New Top Cover And Later Hp Outboard Motor (17.3% similar) Condition: new part. May fit more engines. Only opened to take pictures. This part fits various year ranges of honda outboard motors. Please see included pictures. Part: new ZY3-305ZA top cover 2002 and later BF200 BF225 hp fits various honda outboard motor parts...(September 19th, 2018)
• 16221-zw2-000 Honda Genuine Oem Outboard (34.6% similar) These gaskets are new sealed in original factory packaging...(January 29th, 2018)
• 17520-mfr-740za Honda Oem Fury Fuel Tank Matt Silver (23.7% similar) Very nice clean tank. Has small ding. The rest are no damage or blemish...(April 23rd, 2018)
• 17650-921-003zb Honda Fuel Line Connector Oem Older (34.8% similar) Shipping: is to the lower 48 states only. It is important to me. It is honda part number 003ZB. 1 honda box. This is a brand new oem honda female plug for fuel line connector...(April 20th, 2018)
• 18211-zv0-010 Honda Nos Oem Outboard Gasket Pn (27.6% similar) Nos oem honda outboard gasket pn ZV0-010...(February 26th, 2018)
• 19221-zw1-003 Honda Oem Marine Outboard Water Pump Housing (22.2% similar) ...(May 31st, 2018)