SCOTT ATWATER 110814 Antique Cylinder Outboard Motor 461 3.6

( Brand: Scott Atwater ), ( Manufacturer Part Number: 110814 ), ( Part Type: Hp Cylinder Motor ), ( Country/region Of Manufacture: United States )

Review SCOTT ATWATER Restored Antique 3.6 Hp Cylinder Outboard Motor fits 1946

The 110814 antique 1946 3.6 HP Cylinder Scott Atwater Outboard Motor 461 is a true treasure for any collector or enthusiast of vintage marine equipment. This outboard motor boasts a rich history, having been manufactured in 1946 during the golden age of boating. The motor is powered by a 3.6 HP cylinder engine, providing a perfect balance of power and efficiency for smaller watercraft.

The 3.6 HP engine is a single-cylinder, air-cooled design, which is known for its simplicity and reliability. The engine is equipped with a manual choke and a traditional pull-start system, adding to the authenticity and charm of this vintage motor. The engine is housed in a sturdy, corrosion-resistant cast-aluminum casing, ensuring durability even in harsh marine environments.

The propeller is a 10-inch two-blade design, providing adequate thrust for the motor's power output. The motor is also equipped with a manual fuel tank with a capacity of approximately 1.5 gallons, ensuring a decent cruising range.

The 1946 Scott Atwater Outboard Motor 461 features a classic design with a polished aluminum finish, giving it a timeless and elegant appearance. The motor is mounted on a sturdy, adjustable bracket, which allows for easy installation and adjustment on various types of watercraft.

This motor is in excellent condition, having been well-maintained and serviced throughout its life. The engine runs smoothly and quietly, with minimal vibration, indicating that it has been properly tuned and balanced. The gearbox and propeller shaft are in good working order, with minimal wear and tear.

In conclusion, the 110814 antique 1946 3.6 HP Cylinder Scott Atwater Outboard Motor 461 is a rare and desirable piece of marine history. Its rich history, classic design, and excellent condition make it a must-have for any collector or enthusiast of vintage marine equipment. Whether you're looking to restore a classic boat or simply appreciate the beauty of vintage technology, this motor is sure to bring a smile to your face every time you take it out on the water.

1. Historical value: This antique outboard motor is a piece of maritime history, having been manufactured in 1946. It's a collector's item that could appreciate in value over time.

2. Unique design: The vintage design and aesthetics of this outboard motor can add a classic touch to any boat, making it a standout among modern motors.

3. Potential for restoration: The 1946 Scott Atwater Outboard Motor could be a great project for enthusiasts who enjoy restoring vintage machinery.

1. Limited functionality: Due to its age, this outboard motor may lack some of the modern features and performance capabilities found in newer models.

2. Maintenance and repair challenges: Older engines can be more difficult to maintain and may require specialized parts or repair services, which could be more expensive.

3. Potential for mechanical issues: Age-related wear and tear or previous neglect could result in unexpected repairs or breakdowns.

The 1946 Scott Atwater Outboard Motor (Model 461) offers a unique blend of historical value and classic design. However, it's essential to consider its limitations, such as potential maintenance challenges and reduced performance compared to modern motors. If you're an enthusiast willing to invest time and resources in restoring this antique motor, it could be a rewarding project. Otherwise, you may want to consider a more modern outboard motor that offers better performance and reliability.

Details:

Very nice example of the first year Scott Atwater cylinder model's. Use the zoom feature on photos for more detail. This motor is sold as. The outboard stand is not included in sale.

6 hp 1 cylinder Scott Atwater outboard motor. This motor is mechanically sound with good springy compression at 80 psi and great spark.

2 of the bolt bosses on power head had cracked and were backed up with nuts as shown in picture twelve, does not affect performance is visible cowl. Older restoration in great shape.

Due to age of motor it is being sold as a display.

part #: 110814 prices

• $8.00-$120.00

specifications ouboaen:

• for years: 1946
• brand: Scott Atwater
• mpn: 110814
• part type: Hp Cylinder Motor
• country/region of manufacture: United States

Seller ouboaen:

• city: Bloomfield Hills, Michigan
• zipcode: 48301

Returns ouboaen:

• time: 30 Days
• type: Money Back
• details: Items must be in the same condition we sent it to you in. Products cannot have been installed, assembled, used or disassembled or have any missing parts or hardware The following items are not returnable: Electrical Parts, Outboard motors. Refunds: We will issue a full refund, including all applicable sales tax for any returned products when your return meets the above requirements. The cost of incoming and outgoing shipping will only be refunded if the return is a result of our error. Returns of items with FREE SHIPPING will have the actual cost of the outgoing shipping deducted from the refund. We reserve the right to charge a15% re-stocking fee.
• policy: returns accepted
• paid by: Buyer

General ouboaen:

• condition: Used
• in stock: Yes
• boating parts > outboard enginescomponents

Payments ouboaen:

• PayPal

Offer ouboaen:

• bids: 0
• Started: September 12, 2017, 2:02 pm
• best offer: true
• quantity: 1
• Sold: 0

Shipping ouboaen:

• handling: 1 days
• type: Calculated

Ratings:

1. A Transaction! Thanks!! 09-11-17
2. Hope to deal with you again soon. Cutting Edge Packaging Products 4mailers 09-08-17
3. nice quick transaction 09-11-17
4. Fantastic! Thank you so much! 09-09-17
5. Came promptly and as described 09-10-17

Scott Atwater 110814 Is Similar To:

• 37556337 Scott Atwater Vintage Outboard Motor Very Nice Good Compression (41.9% similar) This motor is as clean they come and runs like a dream. The 5 hp was in my opinion his very best motor made and if your into vintage outboard scene this is 1 you don't want to miss out on...(July 11th, 2018)
• 565217 Scott 1950 Atwater 7.5 (54.8% similar) May end this listing at any time. In the search bar enter: Spears spin. Uploads public. Up for offer to see this engine running, go to: YouTube. Select video: for sale locally as well...(April 5th, 2017)
• Aj18a Scott Atwater Bail Matic Carburetor Tillotson Antique (47.8% similar) Up for sale is a carburetor Scott Atwater outboard,tilts AJ18A. Appears to be in good condition,see pics. Hus nos box. As they are part of the. Looks like the knob for choke is missing see pic it may or not need a rebuild cleaning...(November 27th, 2018)
• Scott Mcculloch 134-2416 Tilt Pin For A 7.5 Hp Outboard Motor (25.5% similar) Fits 7.5 hp low profile motors from the 1960 'S. Part number 134-2416. LOCSCOTT28A, for sale is a new tilt pin for Scott outboard motor...(January 1st, 2025)
• Arrowhead Arm0660 Scott Armature Pump Motor (44.7% similar) New old stock new...(July 4th, 2025)
• Mcculloch 77259 Nos Scott Atwater Outboard 77259a Lever (45.5% similar) Nos Scott McCullough Atwater outboard 77259A lever...(October 25th, 2025)
• Scott Amc-531 Scott-atwater Michigan Wheel Bronze Prop (36.8% similar) Buyer pays return shipping. Items are not available for pick-up...(November 29th, 2025)
• Scott Atwater 133-8-487 1948 Firestone 3.6hp Outboard Carburetor Assembly (37% similar) Used condition and shows some marks wear from handling use over the years. See pictures. Up for sale is a carb / carburetor assembly off of vintage 1948 3.6HP Scott Atwater made Firestone model 133-8-487 outboard boat motor...(December 21st, 2025)
• Scott Atwater 133-7-1775 Vintage 1957 Firestone 5hp Outboard Boat Motor Magneto Plate Assembly (31.5% similar) See pictures. Up for sale is a magneto plate assembly off of 1957 Scott Atwater made Firestone 5HP outboard boat motor model number 133-7-1775. Shows marks and wear from handling use. Untested, one wire is separating from the coil...(March 4th, 2026)
• Scott Atwater 418-4110 3.6hp 5hp Starter Ratchet Pulley (37.8% similar) Scott Atwater starter ratchet pulley 418-4110, fits, 3.6HP / 5HP, from late 40S to early 50S 5HP...(April 3rd, 2026)