EVINRUDE 381186 Propeller Pin Drive Gearcase Rh 14X16

( Brand: Evinrude ), ( Manufacturer Part Number: 381186 ), ( Part Type: Propeller Pin Drive ), ( Motor Engine Type: Johnson Evinrude ), ( Country Of Manufacture: United States )

Review EVINRUDE Johnson Omc Propeller Pin Drive Large Gearcase Model 14x16 Rh fits 1967–1977

The **Evinrude 381186 Johnson OMC 1967 1977 Propeller Pin Drive Gearcase (14x16 RH)** is a meticulously crafted, high-performance marine gearcase designed exclusively for Johnson Outboard Marine Corporation (OMC) engines from the late 1960s through the mid-1970s. This gearcase is a critical component of the pin drive transmission system, serving as the mechanical interface between the engine s output shaft and the propeller, ensuring smooth power transfer while maintaining optimal efficiency and durability. Built with precision engineering, this gearcase features a robust **14-inch pitch diameter** and a **16-inch face width**, dimensions carefully calibrated to match the torque and horsepower requirements of the era s mid-sized OMC engines, typically ranging from 50 to 100 horsepower. The **right-hand (RH) orientation** indicates its compatibility with engines where the propeller spins clockwise when viewed from the rear, a standard configuration for many classic Johnson outboards of this period.

Constructed from **high-grade cast iron**, this gearcase is designed to withstand the rigors of saltwater corrosion, frequent starts, and the mechanical stress of transmitting power through the pin drive system. The internal components, including the **pinion gear and drive shaft**, are engineered to minimize wear while maximizing torque transfer, reducing the risk of premature failure a common issue in older marine systems. The gearcase s **pin drive design** utilizes a series of pins and slots to engage the propeller shaft, allowing for smooth engagement and disengagement, which was particularly useful for boats equipped with manual or automatic shift transmissions. This design also facilitated easier propeller removal and maintenance, a practical feature for boaters of the time who often performed their own repairs.

For collectors, restorers, and enthusiasts of classic marine engines, this gearcase is a sought-after part due to its historical significance and functional reliability. Whether restoring a vintage Johnson-powered boat for recreational use or preserving a piece of automotive history, the **381186 gearcase** ensures that the original performance and character of the engine are maintained. Its compatibility with a wide range of **1967 1977 OMC models**, including popular series like the **Evinrude 50, 75, 100, and 115**, makes it an essential replacement for those seeking to revive or upgrade their vessel s drivetrain. With proper care and maintenance, this gearcase continues to deliver the same dependable power transmission that made Johnson outboards a staple on lakes, rivers, and coastal waters for decades.

### **Pros and Cons of buying a Evinrude 381186 Johnson OMC 1967-1977 Propeller Pin Drive Gearcase (14x16 RH)**

1. **Compatibility with Classic Outboards** This gearcase is designed specifically for Johnson/Evinrude OMC outboards from the late 1960s to mid-1970s, making it a direct replacement for original equipment on vintage boats. If you own a boat from that era, this part will fit without major modifications.

2. **Authentic Restoration Potential** For boat enthusiasts restoring classic vessels, this gearcase is a high-quality, period-correct component. Using an original or reproduction part ensures historical accuracy and improves resale value if the boat is kept as a collector s item.

3. **Durability and Reliability** The pin drive system was a robust design for its time, and with proper maintenance, these gearcases can last decades. If well-preserved, the part may have significant remaining life, reducing the need for frequent replacements.

4. **Easier Maintenance Access** The pin drive system allows for easier access to internal components compared to some modern outboard designs, which can be beneficial for DIY mechanics familiar with older marine engines.

5. **Nostalgia and Collectibility** For those who appreciate mechanical history, owning and restoring a piece like this can be rewarding. It may also appeal to collectors who value original or reproduction parts for classic boats.

6. **Potential Cost Savings** If the gearcase is in good condition, purchasing it used (or even new from a specialty supplier) could be cheaper than buying a modern equivalent, especially if the boat is not a high-performance vessel.

---

1. **Age-Related Wear and Potential Issues** Even if the gearcase appears intact, it may have internal wear, rust, or degraded seals after decades of use. Without a thorough inspection or professional refurbishment, hidden problems could lead to premature failure.

2. **Limited Availability of Parts** While this gearcase is a common model, finding exact replacement parts (such as bearings, seals, or pins) may be difficult. Modern suppliers may not stock these components, requiring sourcing from specialty marine shops or eBay, which could increase repair costs.

3. **Compatibility with Modern Boats** If the boat has been modified or upgraded (e.g., with modern fuel systems, electronics, or larger engines), this gearcase may not integrate seamlessly. A professional assessment is needed to ensure it won t cause alignment or performance issues.

4. **Higher Maintenance Requirements** Older pin drive systems often require more frequent lubrication, inspection, and adjustment compared to modern outboards. Neglect can lead to binding, excessive noise, or failure.

5. **Potential for Counterfeit or Poor-Quality Reproductions** If purchasing a reproduction gearcase, there is a risk of receiving a poorly made or incorrectly sized part. Always verify the seller s reputation and request documentation or certifications if possible.

6. **Resale Value Depreciation** Unlike a restored classic car, a boat with an original or vintage gearcase may not hold its value as strongly in the resale market, especially if the boat is not a rare or highly sought-after model.

7. **Skill and Knowledge Required** Installing or repairing this gearcase may require specialized knowledge of pin drive systems. Mistakes during installation (e.g., improper alignment or lubrication) can lead to catastrophic failure.

---

- Own a classic boat from that era and prioritize authenticity.

- Are prepared to inspect or professionally refurbish the part before installation.

- Have the mechanical skills (or access to a marine mechanic) to maintain it properly.

- Accept that it may require more attention than modern alternatives.

- Need a part for a boat that will see heavy or modern use.

- Lack experience with older marine systems.

- Cannot verify the gearcase s condition or source high-quality replacement parts.

- Prefer the convenience and reliability of newer outboard components.

...then a modern replacement or a different vintage gearcase (if available) may be a safer choice.

1. **Inspect Thoroughly** If purchasing used, have a marine mechanic inspect the gearcase for internal wear, rust, or damage. Look for smooth operation, no excessive play in the pins, and intact seals.

2. **Consider a Reproduction or Refurbished Unit** If buying new, opt for a reputable supplier (e.g., **Classic Marine Parts, Evinrude Outboard Parts, or specialized restoration shops**) that offers warranties or refurbished units with certifications.

3. **Budget for Maintenance** Allocate funds for regular lubrication, seal replacements, and potential future repairs. Older gearcases may need more frequent attention than modern ones.

4. **Evaluate Boat Usage** If the boat is primarily for weekend cruising in calm waters, a vintage gearcase can work well. For high-performance or rough-water use, a modern outboard may be more reliable.

5. **Document the Purchase** Keep records of the gearcase s history (original build year, maintenance logs) to aid in future resale or troubleshooting.

**Final Verdict:** This gearcase is ideal for **enthusiasts restoring or maintaining classic boats** who are willing to put in the effort to keep it running. For casual or modern boaters, a newer alternative may offer better long-term reliability.

Details:

Vintage OMC JOHNSON EVINRUDE 14 x 16 boat propeller as picture.

part #: 381186 prices

• $24.99-$150.00

specifications ouboaen:

• for makes: Johnson, Omc, Evinrude
• for years: 1967-1977
• brand: Evinrude
• mpn: 381186
• part type: Propeller Pin Drive
• motor engine type: Johnson Evinrude
• country of manufacture: United States

offer ouboaen:

• best offers: True
• started: April 16, 2026
• availability: In Stock
• sold: 0
• quantity: 1
• options: Ship-to-home

payments ouboaen:

• wallet: Apple-pay
• credit card: Mastercard
• other

general ouboaen:

• Boat Parts > Outboard Engines Components > Other
• condition: Used

shipping ouboaen:

• service: USPS Ground Advantage
• transit: 4-8 Days
• cost: $9.95
• type: Fixed
• carrier: USPS
• class: Standard

returns ouboaen:

• policy: Returns Accepted
• time: 30 Days
• paid by: Seller

seller ouboaen:

• city: Suffield, Connecticut
• # reviews: 3274
• rating: 100.0%

Evinrude 381186 Is Similar To:

• 017612 017612 Evinrude Brp Johnson E-tec (32.8% similar) Omc, Evinrude, johnson e-etc outboard motor 3 gallon remote oil tank w low sensor good for all and newer systems check model's including will not work with Fichte mounting bracket included...(September 1st, 2017)
• 0439195 5000334 0439195 5000334 Johnson-evinrude Fuel Pump (30.1% similar) Inventory: A1. Condition: unit has been inspected, tested, and approved by a certified outboard marine mechanic. Item: fuel pump johnson Evinrude: this is a used high pressure for 150, 175 hp v6 Fichte years...(April 19th, 2017)
• 395088 395088 Evinrude 1978-1994 85hp-300hp Johnson (27.3% similar) This will fit year model's 85HP-300HP johnson Evinrude outboard motors. This tilt and trim has been tested is in good working condition...(April 12th, 2017)
• 00000 Evinrude 1975 Johnson 85hp (33.6% similar) ...(February 21st, 2018)
• 0116761 Evinrude-johnson Bow Arm Assembly 089287000156 (35.5% similar) Bow arm assembly...(July 25th, 2017)
• 0123278 0123610 Omc Johnson Evinrude Outboard Motor Binnacle Control Box Handle Kit (31.4% similar) New handle kit fits single and dual mount binnacle controls...(May 28th, 2018)
• 0127084 Brp Evinrude Johnson Omc Stringer Thrust Washer (42.3% similar) Thrust washer...(July 2nd, 2018)
• 0127278 Brp Johnson Evinrude Single (27.9% similar) For 1996 and later systems check single binnacle remote controls. Only the cover-no switch or other. Single top mount johnson Evinrude remote control cover. Reference part number in good reusable condition-no fading-no cracks or broken areas...(January 26th, 2018)
• 0127280 Johnson Evinrude Nos Outboard Key (28.1% similar) Calculated shipping uses calculator. Sales: use shipping calculator to get charges. Buyer pays shipping except if free is offered. E of the value prop shaft. Note: ups cannot deliver to a PO. Under no circumstances will we falsify or undervalue export declared value documents. Torn, broken, written ...(February 19th, 2019)
• 0172522 Evinrude Johnson Oem Brp Outboard Ignition Kit 745419000677 (35.1% similar) 5 hp looking for something else. Items will only be accepted for return in their original condition, with absolutely no accessories missing. Correspondence via messaging is preferred...(May 6th, 2018)
• 0172574 New Genuine Johnson Evinrude Sending Unit Kit Lot (26.4% similar) ...(March 1st, 2018)